Hillspot secure wireless-Apple 0SX 10.5 configuration
Step 1: Click the AirPort Icon in the upper right hand side of the menu bar at the top of the screen. Then, select Join Other Network
Step 2: Enter the network name of the wireless network(SSID): hillspot
Make sure that "Remember this Network" is checked off.
Step 3: While in the same window, Select security type, Security: WPA2 Enterprise,
then enter in your user name and password.
Leave 802.1X set to automatic. Click Join.
Step 4: Verify certificate window should pop up. Then, select Show Certificate
Step 5: Make sure that Always Trust "firstname.lastname@example.org" is checked off.
Then, click Continue.
For School Owned Laptops: Enter your Stonehill Domain Username and Password. Then click OK
For Personal Laptops: Enter your personal computer Username and Password. Then click OK
Step 7: While still in the Airport Icon menu, select Open Network preferences
Step 8: In the Network Preferences window, Select the Advanced button in the bottom right-hand corner of the window.
Step 9: In the following Advanced AirPort Network Preferences window, Select hillspot from the Preferred Networks list
Step 10: Move hillspot to the top of the Preferred Networks list. This way, hillspot will be the first wireless network your computer connects to while on the Stonehill Campus. Click OK
Step 11: In the Network Preferences window, Click Apply in the lower right-hand corner. Then close
the Network Preferences by clicking on the Red Circle in the top, left-hand corner. You have successfully configured secure wireless for Apple OSX 10.5(Leopard).