1. Connect the VGA Cable with the audio connector into the VGA port on the Extron Wall Panel, located in both the control booth and on stage left. Connect the other end of the VGA cable to your laptop.
    1. Connect the “stereo mini” audio cable to headphone out port on your laptop if you need audio and into the corresponding audio port on the pwall panel.
  2. Turn the projector on by pressing the ON button, located on the Extron Wall Panel. The projector will take few minutes to power up.
  3. Lower the screen into position using the wall switch
  4. Make sure your laptop is set at a resolution of 1024 x 768 for proper size from the projector.
  5. Once you are finished with your presentation, press the OFF button and the projector will start power down. 
  6. Raise the screen back to the ceiling using the wall switch..
  7. Disconnect your laptop and ensure everything is off.